2019 Yamaha F350C V8 - 25" Shaft


Yamahas new, purpose-built 5.3-liter 350-horsepower V8 outboard leaves the competition in its wake by delivering reliability, style and confidence when youre taking control of the open water. Now available in signature Yamaha gray or new pearlescent white, the F350C is designed to withstand the harshest demands and backed by an unprecedented, industry-leading five-year limited warranty*. Its truly unmatched in its horsepower class for thrust and trust.

The F350C is an engineering achievement. Its impressive displacement and advanced valve train increase power and throttle response, easily producing 350 hp and generating incredible torque between 2000~3500 RPMs. And its all about torque when you have a large offshore boat. Its the power to get you on a plane, and owners will tell you theres nothing that does that like Yamahas 5.3L V8 F350C outboard.

Power & Performance
Big Power: The 5.3-liter V8 configuration is designed to easily produce 350 prop shaft horsepower, with less stress and strain on internal engine components than small displacement, high-output outboards. Four oversized valves per cylinder increase breathing efficiency and contribute significantly to the F350Cs power and torque.
More Torque: Variable camshaft timing and individual, long intake air tracks provide the engine substantially greater torque between 2000 and 3500 RPM. This planes large offshore boats with authority.
Optimum Performance: Seven different sensors constantly measure vital atmospheric conditions and engine functions to give the Engine Control Module (ECM) the information needed to precisely and instantly adjust the fuel/air mixture for optimum performance and economy.
Compact Design, Efficient Exhaust: Precision Multi-Point Electronic Fuel Injection works in concert with long tube intake tracks and Yamahas exclusive Dual In-Bank Exhaust System for maximum efficiency and compact design. Dual In-Bank Exhaust means it exits through the center of the engine between the œV of the cylinders, rather than on the exterior sides, to allow for a more compact shape. The dual exhaust helps the F350C more easily purge the exhaust for greater combustion efficiency and power.
Power and Efficiency: Air enters each cylinder through individual long intake tracks, which are ˜pulse tuned to provide air at the precise volume and timing for maximum density and power. The result is low-end and mid-range power and torque.

Reliability & Durability
Strong and Stable: Its strong-forged, aluminum motor mounts are compressed in molds for greater strength than cast aluminum mounts, and its oversized mounting bracket features six bolts (two more than our F250) to minimize noise and vibration
Ultimate Corrosion Resistance: Whether you have a signature Yamaha gray or new pearlescent white F350C, your outboard is protected by Yamahas Ultimate Corrosion Protection System. This includes proprietary alloys, our Phaze Five paint process and sacrificial anodes placed in and around the power head, mid-section and lower unit to draw corrosion away from vital engine components. A freshwater flush device also helps wash out corrosives, post run.
Built Tough: Streamlined design incorporates hardened gears and high-strength, oversized bearings and bearing surfaces to handle the tremendous power of the F350C. It also features eight forged pistons that are formed under pressure for maximum strength, anodized for corrosion protection and coated with a layer of solid lubricant for added reliability.
Better Cooling: Dual forward and side-mounted water inlets help keep the F350C cooler in a variety of applications and conditions. Dimpled cylinder sleeves also decrease oil consumption and increase cooling surface areas.
Enhanced Cowling Drain System: This drains away water that enters the cowling during normal operation by routing incoming air through a labyrinth of passages. This traps and drains water before it enters the engines intake.

Convenience & Control
Water Intrusion Resistance: F350C has a Tri-Seal latch system to ensure a better fit and seal between the cowling and the lower pan. This means increased resistance to water intrusion for even greater levels of reliability.
Complete Control: The F350C is compatible with new Helm Master with Set Point. This fully integrated digital boat control system features a new suite of Set Point modes, including Fish Point, Drift Point and Stay Point. These modes offer superior boat control for fishing, controlled drifting and maintaining position while waiting at a fuel dock. The F350C is also compatible with our Command Link Plus and Command Link control platforms.
Simple & Compact: Advanced engineering features spark plug caps with the ignition coils build right in. It results in increased performance and reliability in a much simpler and more compact design.
Efficient Combustion: Individual sensors constantly monitor the condition of the combustion in each cylinder for incomplete combustion. Should this occur, they immediately signal the Engine Control Module (ECM) to adjust spark timing to correct it.
Precision Trolling: With Variable Trolling RPM Control, Command Link gauges allow you to adjust the engines trolling speed from 600 ~ 1000 rpm, in 50-rpm increments with the press of a button. This provides consistent trolling speeds in a wide array of conditions.
Costs Less at the Pump: Unlike other outboards in its class, the F350C runs on economical 89 octane. This cuts down on the operating costs, without diminishing power
Gray or White: Choose the look of your F350C, which is now available in signature Yamaha gray or new pearlescent white.

Model Specific Features
Now available in signature Yamaha gray or new pearlescent white
350hp on less-expensive 89-octane gasoline
Available with NEW Helm Master with SetPoint
Compatible with Command Link Plus and Command Link gauges
Industry-leading 5-year Limited Warranty (F350C models only)

Engine Type: V8
Displacement: 5.3L
Bore x Stroke: 94 x 96mm (3.70 x 3.78 in.)
Prop Shaft Horsepower: 350hp at 5500 rpm
Full Throttle RPM Range: 5000 ~ 6000 rpm
Alternator Output at W.O.T.: 50 Amp
Compression Ratio: 9.6:1
Fuel Induction System: EFI
Weight*: 346 kg (763 lbs)
Recommended Fuel: Octane 89
Recommended Engine Oil: Yamalube 4M (See owner's manual)
Recommended Fuel Filtration: Yamaha 10-Micron Fuel / Water Separating Filter (external)
C.A.R.B. Rating: 3-Star
Exhaust: Through Propeller
Intake: 32
Ignition: TCI Microcomputer
Spark Plug: LFR6A-11
Alternator Output: 50 Amp
Starting System: Electric
Lubrication: Wet Sump
Engine Oil Capacity: 6.5/6.3L
Recommended Cooling: Thermostatic Control
Ethanol Blend Limit: 10% Maximum
Gear Ratio: 1.73:1
Gear Shift: Forward, Neutral, Reverse
Shaft Length: 25"
Degree of Tilt: 67°
Degree of Trim: -3° through +16°
Dry Weight: 25" shaft / 346 kg (763 lbs)
Mounting Centers: 28.5"
Steering Angle (maximum): 32° from center, either direction
Warranty: Limited 5-Year Pleasure, 3-Year Government, 1-Year Commercial

*Five-Year Limited Warranty provided by Yamaha Motor Corporation U.S.A. on new F350C model only with production dates of March, 2016 forward. Weight refers to shortest shaft length, and is measured without motor oil, gearcase oil and propeller (except models 25 hp and under, which include a standard propeller). All Jet model weights include the jet pump assembly (weight estimated).
Stock # B3315
Year 2019
Condition NEW
Make Yamaha
Model F350C V8 - 25" Shaft
Location N/A